Ski Boot and Binding Compatibility—Here’s What You Need to Know

Jon Jay

Tue, September 6, 2022 at 2:00 PM UTC

4 min read

This article originally appeared on Ski Mag

Chances are if you've purchased new recreational alpine ski boots in the past few years, your boots likely have GripWalk soles. But if you haven't updated your ski bindings in a while, or they are not GripWalk compatible--indicated by the GripWalk logo stamped somewhere on the toe or if the binding has an adjustable anti-friction device (AFD)--you are putting yourself in harm's way every time you click in.

That's because non-GripWalk alpine bindings will put more pressure between the boot and the binding's toe piece, which, just like cranking up the release value, means that the binding will not release properly during a fall and increase the chance for severe injury.

As GripWalk becomes more prominent every year for the majority of recreational ski boots, the onus is on consumers to upgrade their bindings when buying new kicks.

Fortunately, ski binding technology has evolved over the past decade to incorporate other important features besides boot sole compatibility. New bindings have increased surface area contact points for better ski control, lighter and stronger materials, and even micro-vibration absorption to reduce both leg strain and inadvertent pre-release.

In other words, if you upgrade your bindings, you'll likely upgrade the performance level of your entire ski equipment set-up. Still not sold on upgrading your bindings this season? At the very least, double-check with a professional ski tech to make sure your boots and bindings work together and are adjusted properly before every season.

Glossary of Ski Boot and Binding Terms

GripWalk

GripWalk is both a ski boot sole and binding technology developed by Marker in 2016. On ski boots, GripWalk refers to the rubber, rockered sole technology that first appeared on Dalbello boots to make walking in ski boots easier and safer. At first, GripWalk soles were only compatible with Marker’s GripWalk ski bindings, which were designed to function with both traditional alpine soles and GripWalk without any toe heigh adjustment. However, in the years since more brands have licensed Marker’s GripWalk technology so that most ski boots now feature GripWalk soles, and many bindings across brands feature GripWalk technology (indicated by “GW” in the model name).

MNC

Multi-norm compatible bindings are designed to be compatible with traditional alpine boots (ISO 5355), GripWalk boots (ISO 23223), Walk-To-Ride (WTR) boots, as well as alpine touring/hybrid boots (ISO 9523). Examples of MNC bindings include the Salomon S/Lab Shift MNC, the Atomic Warden MNC, and the Marker F12 Tour EPF .

2023 Marker F12 Tour EPF binding — The Marker F12 Tour EPF is a multi-norm compatible binding that works with alpine boots, GripWalk boots, and alpine touring boots. (Photo: Courtesy Marker)

Read on: The Best New Bindings of 2023

Ski Boot and Binding Norms

Alpine – ISO 5355 (DIN)

Ski boots have hard, plastic, flat soles.
Bindings have non-adjustable AFD plate and/or non-adjustable toe height

The 2023 Lange RS 130 LV is a high-performance alpine boot with a hard, plastic sole. It’s an example of a ski boot with ISO 5355 and is only compatible with alpine bindings that have non-adjustable AFD plates and/or non-adjustable toe height. (Photo: Courtesy Lange)

Related: The Best Alpine Boots of 2023

GripWalk – ISO 23223 (Previously ISO 9523)

Ski boots have rockered soles that incorporate rubber but the contact point with the AFD is plastic
Ski boots may or may not have tech inserts
Step-in bindings are multi-norm (MNC) with an adjustable AFD or toe height OR have GripWalk sticker on toe piece

2023 Salomon S-Pro Alpha 120 ski boot — The new Salomon S/Pro Alpha 120 ski boot is an example of an on-piste boot (no tech inserts) with a GripWalk sole, making it compatible with GripWalk and MNC bindings. (Photo: Courtesy Salomon)

2023 Fischer Ranger Pro 130 GW DYN — The Fischer Ranger Pro 130 GW DYN boot belongs in the ISO 23223 class: It’s got GripWalk soles and tech inserts, so is compatible with GripWalk, MNC, and tech bindings. (Photo: Courtesy Fischer)

Alpine Touring/Hybrid – ISO 9523

Ski boots only have rubber soles
Ski boots likely have tech inserts
Step-in bindings are multi-norm (MNC) with an adjustable AFD or toe height

2023 K2 Dispatch Pro ski boot — The K2 Dispatch Pro boot is certified ISO 9523. It has a Vibram rubber sole and tech inserts that are compatible with MNC step-in bindings with an adjustable AFD or toe plate. They also work with alpine touring/pin bindings. (Photo: Courtesy of K2)

Read more: The Best Backcountry Boots of 2023

Walk-to-Ride (WTR)

Ski boot soles are rockered and incorporate rubber
These types of ski boot soles are becoming harder to find as GripWalk becomes more prevalent
Some bindings are still named WTR, however, they are being phased out due to GripWalk

Non-Compliant Boots

Many backcountry ski boots are made for tech bindings only and are not compatible with any step-in bindings

2023 Dynafit TLT X Boot — The Dynafit TLT X alpine touring boot is an example of a boot that is non-compliant in terms of ISO. These types of boots are designed to only be compatible with tech/pin bindings, not MNC bindings. (Photo: Courtesy Dynafit)

Don't Miss