Types of Paint: A Guide to Paint Finishes and Surfaces
Learn the types of paint finishes and the best type for each kind of surface so you can choose the right paint for your next home project.
Choosing the right type of paint and finish is just as—if not more—important than picking a paint color. Although many homeowners don't pay much attention to this step, there are essential factors about the types of paint you should consider before heading to the paint store.
Paint comes in several finishes, each serving a different purpose. The finish (also called sheen) measures how much light reflects from the paint—in short, how shiny it is. Although the amount of pigments and additives control the sheen, what's important to know is that some types of paint finishes look better and are easier to clean on certain surfaces.
Related: How to Paint Plastic Like a Pro
Buying the correct type of paint for your project will prevent you from having to redo it later. So before you put that brush on the wall, be sure you have the right finish for the job. Here's a comprehensive list of everything you need to know to get it right the first time.
Types of Paint
If you thought choosing paint was as simple as deciding on a paint chip color, think again. You’ll need to determine the best paint type before you even start thinking about finishes. Types of paint include primer, finish coats, interior paints, and exterior paints. They’re all used for different surfaces in different ways, and choosing the right one is essential to nailing your paint project on the first try.
Here’s what you need to know before you head to the hardware store.
Primer
Primer is a base coat that should be applied to any surface before your paint color. It acts as a protective foundation and helps make your finished paint job appear smooth and even. It also cuts down on the number of coats you’ll need, and because it goes on white, it minimizes the chances that whatever color is underneath will show through your new color. Applying primer might seem unnecessary, but it can make all the difference in the final result.
Finish Coat
While the term ‘finish coat’ sounds like a fancy sealant that adds an extra step to your project, it just refers to the type of paint you put over the primer. Since you’ll choose the right paint finish for your job (more on that below), you won’t need to add anything over the top to seal it.
Interior Paint
This one is self-explanatory: Interior paint should be used on everything inside your home, including walls, cabinets, and furniture.
Exterior Paint
Exterior paint is typically more expensive than interior paint, but you definitely don’t want to cut costs in the paint department when painting something outdoors. It’s specifically designed to be weather-resistant while adjusting to drastic temperature changes. Using exterior paint for an outdoor project will make it last longer and look better.
Related: Is Painting Your Home's Brick Exterior a Good Idea?
Water-Based Latex Paint
There are many types of paint (including oil, acrylic, and more), but water-based latex paint is standard for most home paint jobs. It’s easy to apply, quick to clean, and safe for those with latex allergies.
How to Choose the Right Type of Paint Finish
Most types of paint fall into four sheen categories—flat, satin, semigloss, and gloss. Manufacturers may choose descriptive names such as matte or eggshell, so avoid surprises by checking actual samples when comparing paints. Sheen affects not only the appearance of a painted surface but also its durability. The higher the sheen, the tougher the finish.
But don't assume all glossy paints display the same reflectivity. Sheen isn't standardized from brand to brand. One company's satin finish may be glossier than another's.
A paint's sheen may alter the perception of its color. For example, the same tint of white may look brighter in glossy enamel than in flat wall paint. That's because more of the color is reflected, even though it's the same. To make sure you have the sheen you want, take home samples of the types of finishes for the paint you're considering using and apply them to test boards.
Related: 31 Creative DIY Paint Projects to Personalize Your Home Decor
Flat Paint
Also referred to as matte, flat types of paint are almost chalky in appearance. The finish doesn't reflect light, so there's little or no shine. Because of the lack of reflection, surfaces painted with a flat finish effortlessly hide imperfections. However, flat paints are the least durable and don't stand up to washing and scrubbing as other finishes do. Use this type of paint in a low-traffic area (like a bedroom), on your ceiling, or on walls that have gotten a little beat up over the years.
Satin Paint
A slight amount of light reflects off a satin finish, making the texture more noticeable. Satin paint types come in different sheens, like eggshell (which can also appear between a flat and satin). Along with its higher sheen, satin is stronger than flat paint. Consider applying it in kids' rooms or any high-traffic area where you frequently scrub the walls.
Semigloss Paint
Semigloss paints have more durability and sheen than satin finishes. This type of paint won't wear down from cleaning, so it works best in bathrooms and kitchens. It's also great for wall trims. If you paint your cabinets, sand and wipe them down before painting—the gloss makes imperfections stand out. In addition, the reflective surface of semigloss paints helps darker rooms feel lighter and brighter.
Related: 4 Paint Colors You Should Never Use in the Bathroom (And What to Use Instead)
High-Gloss Paint
High-gloss finishes are the shiniest and most reflective of all types of paint. Whatever color you apply with this sheen will be a standout feature of the room. It has a hard surface that stands up to wear and tear, so don't be afraid to use it on hutches, cabinets, or vanities. Remember that the highly reflective surface draws attention to scratches and dents. High gloss is our go-to paint for smooth furniture or freshly installed trim.
The Best Types of Paint for Different Surfaces
The ideal paint type and finish combinations will change with each project, but there are a few basics to consider. These are the best paint types for different rooms and common DIY projects.
Paint for Ceilings
Ceilings don't suffer the abrasion other surfaces endure, but cooking debris, airborne grease, smoke, pollution, and dirt gradually make them dingy and dull. A flat or semigloss sheen is a good choice for ceilings because it hides imperfections. Because paints formulated specifically for ceilings are thicker, they're less likely to stain, are non-yellowing, and dry faster.
Related: 9 Ceiling Paint Colors Designers Love That Aren’t White
Paint for Walls
Many home builders apply flat paint to walls to help disguise less-than-perfect drywall finishing. But most flat paint types quickly show wear. Attempts to clean away marks often result in creating a larger smudge. Satin paint is more forgiving, with substantially upgraded durability and no excessive shine. Paint for bathrooms and kitchens contains extra mildewcide agents and is moisture- and peel-resistant.
Ask a paint expert at your local home store for information on paint types for children's rooms. Formulated for hard use, they can also be perfect in other demanding locations, such as kitchens, baths, laundry rooms, and hallways. Paint the walls of your kitchen with a semi-gloss or gloss finish to make it easier to wipe them clean.
Related: How to Paint Walls Like a Pro
Paint for Cabinets
Semigloss is the best type of paint for cabinets, especially in kitchens and bathrooms. Durable and easy to clean, semigloss paint works well for high-traffic areas and cabinets that are constantly in use. High gloss paint is also an option, but this finish tends to draw more attention, so it's best for bold colors or a focal point. Chalk paint can also be used for cabinets; the matte finish can hide imperfections.
Paint for Wood Furniture
When painting wood furniture, satin or semi-gloss is the most reliable type of paint. If you’re painting a piece that’s used frequently, such as a dresser or nightstand, semi-gloss is the more durable option. When painting dark wood, use a primer to provide a solid base coat, and make sure your top coat sticks. Consider using a paint sprayer (rather than a brush or roller) for intricate pieces to ensure an even coat.
Related: How to Use a Paint Sprayer
Paint for Bathrooms
Whether painting the walls or updating your vanity, consider additional factors when choosing the type of paint for a bathroom. Because bathrooms typically produce a lot of moisture, you’ll want to be confident that your paint will hold up over time. Semigloss or high-gloss paint is best because it’s easy to wipe down, and you can even ask your local paint shop to add a mildew-resistant additive to whichever finish you choose for even more protection.
Related: 13 Before-and-After Vanity Makeovers You Need to See
Paint for Trim
Doors, windows, and moldings typically need a higher sheen than walls because they get more physical contact. A glossy paint finish accentuates the woodwork and adds an interesting contrast. Choose a type of paint for your trim that's at least one step glossier than the walls.
Frequently Asked Questions
Does the type of paint finish change the color?
Paint colors can change slightly based on the finish you choose. Light- and mid-tone paint colors will look richer and more saturated with a semigloss or high-gloss finish, while matte finishes tend to subdue colors a bit. Similarly, dark paint colors tend to look even deeper in semigloss or high-gloss finishes.
What kind of paint is best for interior walls?
Satin paint is the most common type of interior wall paint. You might want to opt for semigloss paint in high-traffic areas such as kitchens and kids’ rooms, as it is easier to clean.
What's the best color to paint the interior of my house if I want to sell it?
Neutrals in light colors, including taupe, cream, white, and gray, are the safest choices for painting the interior of your home for resale since they allow buyers to picture their favorite furnishings against your home's walls. In most cases, light colors open up a space, so it feels bigger.
For more Better Homes & Gardens news, make sure to sign up for our newsletter!
Read the original article on Better Homes & Gardens.